
EAN: 0764804148480
FetHead Phantom is an ultra-low noise, high quality, in-line microphone preamplifier. It provides
improved sound for condenser microphones. Small, compact, but powerful, Fethead Phantom utilizes
tried and true FET technology to deliver up to 18dB of clean boost. No more cranking your mic
preamp and adding unwanted noise to get your microphone to an acceptable volume.
Operation
Your Fethead will latch straight onto any XLR equipped microphone, or anywhere else in the signal
path between microphone and preamp/mixer.
Fethead Phantom uses phantom power to power its circuitry, but also provides enough phantom
power to power the connected microphone.
Recommended applications
Our FetHead Phantom is recommended for improving the signal to noise ratio and performance in the
following situations:
• Recording direct into a DAW interface
• Noisy or low gain preamps
• Mixers/preamps that negatively impact the sound at higher gain setting
• Handheld digital audio recorders
• Condenser microphones
• Miking all types of softer sound sources
Circuit topology
FetHead Phantom utilizes a low noise FET amplifier circuit, which reveals every detail with pinpoint
accuracy and offers high-end sound quality.
Features
• Low noise Class A FET amplifier
• 18 dB amplification (@3000 Ohm load)
• Balanced XLR input/output
• Lots of headroom
• frequency response 30hz-100khz (+/- 1dB)
• Z-in 1000 Ω
• Circuit is powered with 24-48V phantom power
Ook bij Amazon
Vergelijk de prijs op Amazon.nl
We mailen je binnen 24 uur een antwoord over de TritonAudio - FetHead Phantom - in-line pre-amplifier. Geen verkooppraat.
FetHead Phantom is an ultra-low noise, high quality, in-line microphone preamplifier. It provides
improved sound for condenser microphones. Small, compact, but powerful, Fethead Phantom utilizes
tried and true FET technology to deliver up to 18dB of clean boost. No more cranking your mic
preamp and adding unwanted noise to get your microphone to an acceptable volume.
Operation
Your Fethead will latch straight onto any XLR equipped microphone, or anywhere else in the signal
path between microphone and preamp/mixer.
Fethead Phantom uses phantom power to power its circuitry, but also provides enough phantom
power to power the connected microphone.
Recommended applications
Our FetHead Phantom is recommended for improving the signal to noise ratio and performance in the
following situations:
• Recording direct into a DAW interface
• Noisy or low gain preamps
• Mixers/preamps that negatively impact the sound at higher gain setting
• Handheld digital audio recorders
• Condenser microphones
• Miking all types of softer sound sources
Circuit topology
FetHead Phantom utilizes a low noise FET amplifier circuit, which reveals every detail with pinpoint
accuracy and offers high-end sound quality.
Features
• Low noise Class A FET amplifier
• 18 dB amplification (@3000 Ohm load)
• Balanced XLR input/output
• Lots of headroom
• frequency response 30hz-100khz (+/- 1dB)
• Z-in 1000 Ω
• Circuit is powered with 24-48V phantom power
De TritonAudio - FetHead Phantom - in-line pre-amplifier is een product van Tritonaudio. Op deze pagina vind je de volledige productinformatie, actuele prijzen en reviews.
De TritonAudio - FetHead Phantom - in-line pre-amplifier is momenteel verkrijgbaar vanaf € 79,00 bij Bol.com. Prijzen kunnen dagelijks wisselen.
Voor de TritonAudio - FetHead Phantom - in-line pre-amplifier is nog geen reviewscore beschikbaar. Bekijk de productspecificaties en beschrijving om te beoordelen of het product bij jou past.
De TritonAudio - FetHead Phantom - in-line pre-amplifier is verkrijgbaar bij Bol.com. Klik op een aanbieder om direct naar de productpagina te gaan.
De prijzen worden dagelijks automatisch ververst vanuit onze partnerwebshops. De definitieve prijs inclusief eventuele acties zie je op de webshop zelf.
Productvraag verzamelt productinformatie, prijzen en reviews van Nederlandse webshops op één plek. Zo kun je snel zien wat een product kost, wat gebruikers ervan vinden en waar je het kunt kopen.