colorFabb Special Glowfill 3D-printerfilament - 1,75 mm - 750 g - Glow in the Dark - Fun for Kids - Easy to Print

En als de lichten uitgaan, is er glowFill. Wanneer je het print, met regelmatig licht aan of overdag, is het een heel mooi, romig filament met een heel gladde afwerking. Hoe mooi het ook is, het verandert als de lichten uitgaan. Dan zul je het zien gloeien. Een speciaal hooggeconcentreerd fosforescerend pigment is gecombineerd met onze PLA / PHA-compound, zodat het net als onze andere PLA / PHA 3D-printfilamenten wordt geprint. Het is verreweg een van de leukste filamenten die tot fantastische prints kunnen leiden.

Kleur: bruin
Materiaal: PLA
Spoolgewicht: 750 gr
Diameter: 1.75 mm
EAN: 8719033555143

Light-Charged Glow Magic for Your Prints
With glowFill you can turn everyday 3D prints into luminous, eye-catching creations. This filament blends a PLA/PHA base with a highly-concentrated phosphorescent pigment, so your model glows in the dark after exposure to light.
In daylight or standard lighting it prints like a smooth, creamy filament, and once you switch off the lights it reveals a fun, glowing effect — perfect for decorative accessories, toys, signage and fun projects.
Print tip: Use nozzle temperature ~195-220 °C and bed ~50-60 °C (if used). Print at moderate speed (40-100 mm/s) and use 100 % infill for maximum glow intensity.

Easy to Print, Reliable PLA/PHA Base with Special Effect
Don’t let the name “glow” fool you – the filament is built on the trusted PLA/PHA platform with diameter tolerance within ±0.05 mm and density ~1.210-1.430 g/cm³, so you benefit from familiar print behaviour and predictable results.Use the same hardware you already own, expect good layer adhesion, and benefit from standard settings: 195-220 °C nozzle, optional heated bed 50-60 °C.
Usage advice: Use a clean nozzle, moderate cooling, and ensure your part is exposed to a strong light source before turning off lights — the glow effect is charged by light exposure.

Creative, Functional & Glow-Enabled Applications
With glowFill you open up a world of creative applications: from night-time signage, keychains, toy elements and themed props, to emergency markers, glow-in-the-dark décor and fun educational models.
The luminous finish stands out in low-light conditions, while in normal light it behaves like a standard PLA/PHA material. This makes it both visually impressive *and* versatile.
Pro tip: For maximum glow duration, print with 100% infill and keep walls thick enough (~1.2 mm) so that the pigment load is high. After printing, expose to bright light (sunlight or LED) for a few minutes.